Skip to main content
Sprinkler system running on a green Utah lawn with mountain backdrop
InstallationRepairConversion

IRRIGATION SYSTEMS

Smarter water delivery for Utah landscapes — new installs, repairs, and drip conversions that qualify for the state rebate.

What We Do · Salt Lake Valley Irrigation

01

Sprinkler System Installation

New systems designed and installed from scratch — zoned by plant type, calibrated to your lot size, and programmed on a smart controller that adjusts automatically for weather. We handle the trenching, line runs, head placement, backflow preventer, and final pressure test.

02

Drip Conversion

Convert your spray zones to precision drip to slash water use by up to 40% and qualify for Utah's rebate upgrade bonus. Drip is required for all xeriscape turf removal projects and earns an additional $1.00/sqft from JVWCD on top of the base conversion rebate.

03

Repair & Winterization

Broken heads, leaking valves, failed controllers, and cracked lines repaired on-site. Full system blowouts in October–November to clear standing water before Utah's first hard freeze — the single most cost-effective thing you can do for your irrigation system every year.

Drip vs. Spray · The Real Numbers

Why Drip Changes Everything

The efficiency gap between spray and drip is not a marginal improvement. It fundamentally changes what a landscape can do on Utah’s water supply.

Spray Sprinklers

System efficiency50–70%
Loss to evaporation & wind30–50%
Runoff riskHigh on slopes
Utah rebate eligibleNo
Required for xeriscape rebateNo

Drip Irrigation

System efficiency90%+
Loss to evaporation & windUnder 10%
Runoff riskMinimal
Utah rebate eligible+$1.00/sqft bonus
Required for xeriscape rebateYes

JVWCD Drip Upgrade Bonus

Your Drip System May Be Rebate-Eligible

JVWCD pays an additional $1.00/sqft when you convert from spray to drip as part of a turf removal project. On a 2,000 sqft conversion that’s an extra $2,000 on top of the base conversion rebate — just for installing the better system.

See Full Rebate Guide

More watering and rebate guides in our Field Notes blog.

The Process · Start to Final Test

How a New System Gets Installed

Six stages from design to your first automated watering cycle — and one more we schedule every October.

01

System Design

We map your lot, identify existing water pressure and supply line size, and zone the system by plant type and microclimate. Drip zones, spray zones, and rotary head zones are separated so each gets the run time it needs.

02

Trenching & Lines

Mainline and lateral lines are trenched to Utah frost depth (typically 12–18 in) to prevent freeze damage. We backfill and compact to restore your soil profile and minimize settling.

03

Head & Emitter Placement

Rotary or fixed heads are positioned for head-to-head coverage in turf zones. Drip emitters are sized and spaced per plant water need and rebate specification requirements.

04

Controller Programming

Smart controllers are programmed with seasonal run times, rain-sensor integration, and zone-specific schedules. We walk you through every setting before we leave and leave a laminated zone map at the controller.

05

Test & Adjust

Full system test with every zone running. We adjust head deflection, pressure, and coverage overlap on-site until everything is dialed. Any issues get fixed before the crew leaves.

06

Winterization Schedule

We note your system on our fall blowout list. When October arrives, we contact you to schedule your winterization before the first hard freeze — removing all standing water from lines, heads, and the backflow preventer.

FAQs · Irrigation Systems Utah

Common Questions

How much does sprinkler repair cost in Utah?

Most residential sprinkler repairs run $75–$200 depending on the issue — a broken head is at the low end, a damaged valve or controller replacement is higher. We diagnose the full system during the service call so there are no surprises. A free estimate is available for any new installation.

What's the difference between drip irrigation and spray sprinklers?

Spray sprinklers broadcast water over a wide area, losing 30–50% to evaporation and wind drift. Drip systems deliver water through emitters directly at the root zone, operating at 90%+ efficiency. Drip is required for xeriscape rebate applications and earns an extra $1.00/sqft upgrade bonus from JVWCD.

When should I winterize my sprinkler system in Utah?

In the Salt Lake Valley, the first hard freeze typically arrives in late October. We recommend scheduling winterization (blowout) between mid-October and early November. Waiting until a freeze warning is already in effect risks cracked lines and split backflow preventers — an expensive repair. We book up fast in fall, so contact us by September.

Does a drip system qualify for the Utah turf rebate?

Yes — a qualifying drip system installed as part of a turf removal conversion earns an additional $1.00/sqft from JVWCD on top of the base $2–3/sqft rebate. The drip system must meet specific emitter spacing and coverage requirements. We design and install to those specs on every xeriscape project.

How long does a new sprinkler system installation take?

A standard residential sprinkler or drip system installation takes 1–3 days depending on lot size, number of zones, and soil conditions. We handle permit pulls where required and walk you through controller programming before we leave.

Free Estimates · Licensed & Insured

Ready to Fix or Upgrade Your System?

New install, repair, drip conversion, or winter blowout — we serve the full Salt Lake Valley and book fast in season.

Irrigation Systems

Salt Lake Valley · Xperience Landscaping